performance – Timing belt diagram maintenance replacement

Timing Belt Symptoms

A timing belt handles the timing of the engine’s valves. If a timing belt snaps, certain kinds of engines could be damaged. It’s better to replace the timing belt if you have hit the amount of miles your vehicle manual recommends for a replacement, or if you notice some symptoms signaling which the timing belt is going bad.

There’s two different kinds of engines: interference and non-interference. In case your timing belt snaps or slips on an interference engine, the engine is going to be badly damaged costing a small money in repairs. In case a timing belt snaps on a non-interference engine, the engine is going to be damaged but won’t cost too much in repairs as an interference engine.

The failure of a timing belt is probably the most typical main reasons why cars breakdown. If you’re acquainted with the timing belt, the way it functions and the way to recognise whether or not some thing is wrong with it, you’ll be able to avoid serious damage to your vehicle and you will know when you should replace it. Know-how about timing belt symptoms could save you from having to experience being stuck on the side of a road due to a broken timing belt.

With no correctly functioning timing belt, an engine’s pistons would stop to operate therefore a vehicle will be not able to work. Worn timing belt can’t perform its job appropriately for this reason old timing belts can result in performance issues with a vehicle.

Now there are several timing belt symptoms to take into consideration: if the car’s engine vibrates a lot which it leads to the whole car to shake, in case your car starts belching much more exhaust than normal, if you encounter difficulty in starting the car or in the event you hear strange noises from the car’s engine. These types of are just some of the common timing belt symptoms. In the event you encounter one or more of those it might be ideal to consult with a mechanic as quickly as possible. Other timing belt symptoms can vary then one of them is emitting of excess smoke. When your car emits smoke a lot more than the usual that is a sign which your timing belt could have a issue.

These are the basic timing belt symptoms that you need to watch out for if you wish to prevent causing major damage to your car’s engine. Some of the reasons for timing belt damage are oil leak and getting too hot. To prevent these issues it’s better which you carry out regular check-up for your vehicle. If you’d like to learn more about timing belt as well as other timing belt symptoms, you could browse the internet for websites which has this type of information.

If you have ignored the symptoms and your vehicle conks out and stops running it’ll probably are already too late. So keep in mind, at the time you notice these timing belt symptoms it might be better to get your car checked. Awaiting the damage to become severe is certainly not something you will want to do.

What you will need:

1. Combination Wrenches
2. A Socket Set
3. Torque Wrench
3. A Harmonic Balancer Puller
5. A Three-jaw Gear Puller
6. Screwdrivers
7. Hammer and Punch
8. Gasket Scraper
9. Timing Light
10. Tube of Silicone Sealer
11. Timing Chain Cover Gasket Set
12. New Timing Chain and Gears
13. Drain Pan
14. Antifreeze
15. Jack
16. Jack stands

Before You Start:

Follow these instructions carefully. Read and be sure you understand them before you begin.
Gather together all of your tools and supplies before you begin.
Allow plenty of time to do the job so you don’t have to hurry.
Remember that these are general instructions. For more detailed instructions pertaining to your specific vehicle, consult an appropriate repair manual.
Safety is important whenever you’re working around machinery. Beware of hot objects, sharp instruments and hazardous materials.
Don’t substitute tools unless you’re sure you won’t compromise either your safety or the performance of your vehicle.
Never work on a vehicle that is only supported by a jack. Use jack stands to support the vehicle while you work. Work on a solid, level surface. Never jack a car up on dirt or grass.
Why Replace Your Timing Chain?

Over time, wear on internal working parts of your engine will spell the need for replacement. One of the internal working parts that wear is the timing chain and timing sprockets. The timing chain and sprockets are the connecting line between the crankshaft and the camshaft. As the crankshaft turns, via the timing chain, it drives the camshaft that operates the engine’s valves via the lifters, push rods and rocker arm assemblies The timing of the valves opening and closing at precise intervals is crucial for proper engine operation. As the timing chain and sprockets wear, this precise timing of the valves gradually changes, eventually to a point where replacement is necessary.

Telltale signs of worn out timing chains are:

Rough idle.
Sluggish performance and poor economy.
Sudden engine performance change including the inability to start the engine.
Intermittent backfire through the intake manifold.
Inconsistent ignition timing or a clattering noise coming from the front of the engine.
Before starting the disassembly procedures, I would suggest cleaning the engine with an engine degreaser. A clean engine is easier to work on and helps prevent dirt or contamination from entering the engine during disassembly.