Tag: help

Posted on

How to Prevent Cold-Weather Stalls: Winterizing your Battery

Hunting season is fast approaching, and that means it is time to at least start THINKING about winterizing your vehicle. Have you ever jumped inside your car to head to work in the morning to find your car will not start? It’s happened to the best of us, but there are a few simple things you can do to help prevent this scenario from happening to you this winter.

Something to keep in mind is that our car’s battery loses about a third of its starting power when the temps dip down into the 30’s. In addition, our driving habits in the winter make it less likely the alternator will be able to fully recharge our car battery as we drive. For example, we tend to drive less often and we drive shorter distances in the winter, we constantly run the defrost and we are using our headlights more than in the warmer months – all putting a larger load on the alternator.

So what can you do?

1) Take a Peek Under the Hood: Have your battery checked before winter hits to make sure your terminals are tight and your battery is not corroded. (Stop in at Cars For Keeps & We’ll do it FREE!)

2) Turn “Stuff” Off: Turn off your blowers and accessories when you turn off your car so there isn’t as large of a load on your battery when you go to start your vehicle again. Turn your headlights on after you start your vehicle, NOT before.

3) Park Inside: Park your vehicle in a garage if you have one. This will help keep the battery somewhat warmer.

4) Pay Attention to Your Headlights: Do they dim and brighten on occasion? If so, stop by Cars4Keeps and one of our technicians can test your alternator for you.

5) Listen to Your Vehicle Start: Do you notice your car is having trouble turning over (starting), but once it is running everything seems normal? This may indicate that your battery has a low charge, weak connection or strater getting ready to leave you walking.

The last thing any of us need this winter is to be stranded somewhere with flakes swirling around us and a car that refuses to start. Be proactive and take winterizing your vehicle seriously this year. While there is more to it than batteries and alternators, a quick stop into Cars4Keeps is all you need to get your car in top winter condition.

Posted on

When To Replace Your Timing Belt

Timing belt replacement is the “must-do” service operation which every car owner should know about. Along with that knowledge, we should be aware of whether our engine is considered an interference engine or not. These two bits of information can, at a minimum, save us from unexpected breakdown and in the extreme can help us avoid thousands of dollars in repairs.
Without getting too technical, the synchronization between two internal engine parts (the crank and cam shafts) is accomplished with the help of the timing belt. In the process of these two parts moving the valves open and close in close proximity to the pistons. This constitutes an interference engine, because if the timing belt jumps a tooth on the sprocket on which it rides or the belt fails altogether the valves and pistons will “interfere” with each other.

This collision will cause major damage to the engine. The repair bill will, on older vehicles, often exceed the value of the car. On the other hand, a car whose engine is not configured this way will simply lose power or will not start. While this might be more desirable than facing huge repair costs, it is something that is better avoided if possible.

The motivation for preemptive replacement of the timing belt is obvious. But how do you know when to replace it? There is always the owner’s manual which will indicate mileage of anywhere from 50,000 to 90,000 miles. For a comprehensive list of timing belt service intervals and the type of engine (interference or not) check out About.com.

Some other considerations relative to timing belt replacement are:

1) Is the vehicle leaking any type of fluid that might degrade the belt, if so disregard the suggested replacement interval and replace the belt ASAP as well as repair the leak;

2) Do you know the repair history of the vehicle if it is not verifiable err on the side of safety and replace the belt;

3) Timing belt replacement can be labor intensive. Since the water pump is usually accessed in the same operation you might consider replacing the pump at the same time even if it doesn’t leak. You will save on labor and possibly prevent a pump replacement later on that will also necessitate the belt to be replaced again;

4) To avoid subsequent failure consider replacing sprockets and tensioners that are part of the timing belt system. All components are sometimes sold as a kit and can be less expensive than purchasing them individually.

All service intervals should be followed in order to protect your investment and maintain the integrity of your warranty. In the case of the timing belt, it just makes sense.